Yard Size Programming

When measuring your lawn, you want to be as accurate as possible. After all, you don't want your mower running off outside your property. To measure your lawn:

1. Start by walking around the lawn's perimeter.
2. Use a measuring tape or other measuring tools to get the length and width of your lawn.
3. Once you have those measurements, multiply the length by the width to get the square footage of your lawn. 

Now that you have the square footage of your lawn, you can start programming your mower to mow a specific area. Here are the steps to programming the MowRo: 

1. Unlock the mower.
2. Press the "Set" button until the meters squared icon is shown at the top of the LCD screen. 
3. Use the up and down arrows located on the "Home" and "Start" to increase or decrease the mowing area. 
4. Tap the "Set" button to save the mowing area.  

 And that's it! You've now programmed your mower to mow a specific area. This is great for making sure your mower doesn't go off the edge of your lawn and into your neighbor's yard.